How to Put on a Lace Front Wig to Look Flawless

Lace Front Wigs are the go-to wig type for anyone who wants to look naturally glam without spending a fortune. With a good lace front wig install, you’ll look flawless during special occasions, casual outings, or even when you’re just chilling out on the couch.

Unfortunately, when people get their new lace front home, they are often confused about how to apply it. There are two ways to put on a lace front wig – with glue and without glue. In this article, we’ll tell you how to put on a lace front wig without glue using both of these methods. Let’s get right into it! 

Tips to Get the Perfect Lace Front Wig Install

We’ll bet you want your wig to look absolutely perfect, and it’s possible – we promise. To get a perfect lace frontal installation, review the following tips! 

  • Choose skin-melt lace or a lace color that matches your skin tone:

How to install lace front wig, If your wig’s lace doesn’t blend seamlessly with your skin, it won’t look natural. Luckily, lace comes in various shades, so you can shop around for a lace front with lace that matches your skin tone perfectly. But if you want to go the easier route, opt for skin-melt lace, which matches any skin tone, no matter how light or dark it is. New Clear Lace & Clean Hairline Wigs come with skin-melt lace that’s 100% undetectable against the skin.

How Many bundles of hair enough for a full head 06
How Many bundles of hair enough for a full head 06
  • Choose the right wig size:

Choosing the right wig size is extremely important – this will ensure that your wig is easy to install and fits snugly on your head. If you choose a wig that’s too small, it can quickly become uncomfortable to wear. If your wig is too large for your head, it may slip.Do yourself a favor and measure your head size before you buy a lace front wig. Then use our size charts to make sure you’re getting the correct size.

  • Cut the lace off correctly:

It’s essential to cut the excess lace along the hairline (in front of the hairs) and around the ear tabs. If you don’t cut the lace right, the lace will not lie flat along your hairline. Follow these steps to cut your lace like a pro: 

  • If you’re a beginner, place your wig on a mannequin head and use nail-cutting scissors or any other small scissors to begin cutting the lace. 
  • Start at the middle of the lace and move outward. If your wig has baby hairs, be careful not to cut those off. 
  • Cut a little lace at a time to ensure that you don’t accidentally cut off too much. Don’t cut straight across, as this will make the lace harder to blend into your skin and hairline. Instead, use round, wavy motions that follow your natural hairline.
Can Wearing Wigs Damage Your Hair
Can Wearing Wigs Damage Your Hair

For more detailed instructions on how to cut the lace off of your lace front, read our step by step guide on “How to Cut a Lace Front Wig” – it’ll tell you everything you need to know.

  • Create some baby hairs:

Baby hairs come in handy when hiding the edges of the lace. To start, use a rat tail comb to part out a thin section of hair across the wig’s hairline. Then, gently and slowly trim the section with an eyebrow razor until the hair is about 1 inch long. As you trim, make sure you’re holding the section taut and moving the eyebrow razor in an up and down motion. Your baby hairs are done! 

  • Add foundation to the wig’s hairline and part:

This is an optional step that you can take to make your wig look even more natural. Make sure that the foundation is the same color as your skin. Apply it liberally until the lace starts to look like your skin. Powder foundation works best. 

Prepare/Flatten Your Hair for Wig Installation

Now it’s time to prepare your natural hair for wig installation. Why? Because if you apply a wig to unprepped hair, the unit may sit too high on your head. Not only will this ruin your style, but it will also reveal that your wig is not real. So, prepping your natural hair is a step that no one should skip. 

There are a few ways to prepare your hair for a lace front wig application, and we’ll fill you in on all of them. 

Cornrow your hair

put the hair under the wigs
put the hair under the wigs

One of the most common ways to prep your natural hair is to put it in cornrows. There are several parting patterns to choose from, but the most widely-used pattern for both short and long hair is “straight backs”.All you’ve got to do is part your hair into seven or more straight-back sections and cornrow each section straight to the back. Gather the ends of the braids together and use some bobby pins to secure them to the back of your head. This will keep them from unraveling.If you braid your hair down, it will be protected from tangles and your wig will lay flat and sleek. 

Slick your hair back

If you’re not a good braider, don’t worry. If your hair isn’t too long or thick, you can just slick it back with some gel or holding spray. Just apply gel to the hair around your edges and use a boar bristle brush to brush your hair backwards. Gather your slicked back hair into a low ponytail and secure the ends to the back of your head with bobby pins. After you’ve done that, put on a nylon wig cap to keep your natural hair in place as you wear your wig. 

Braids

put the hair under the wigs
put the hair under the wigs 03

If your hair is fine, you can put it into a couple of three-strand plaits (braids) and then pin them down to your head. Apply a wig cap afterwards to keep your hair in place. 

Note: Before you do any of the above hair-flattening methods, ensure that your hair is shampooed, conditioned, moisturized, and 100% dry. 

Once you’ve got your natural hair prepped, you are ready to learn how to install a lace front wig. 

Best Way to Put on a Lace Front Wig 

The best way to put on a lace front wig is using glue. The glue holds the lace securely so that your wig stays firmly in place – you won’t have to worry about strong winds, intense physical activity, or accidentally pulling it off. Depending on the wig glue you use, you can get up to 6 weeks of wear. If you use got2b glued spray, your wig will stay on for up to a week.

Tools and Products You Need to Apply a Lace Front Wig with Glue

Here are the products and tools you’ll need to apply your wig with glue:

  • Wig stocking cap
  • Wig glue or got2b Glued Spray
  • Bobby pins or hair clips
  • Rat-tail comb
  • Alcohol prep pads or rubbing alcohol and cotton balls
  • Nail cutting Scissors
  • Eyeliner in white
  • Blow dryer with a “cool” setting
  • Silk or satin scarf

Step by Step Guide on How to Wear a Lace Front Wig Using Glue/Adhesive

Here’s the fun part – installing your wig! To put on a lace front wig effectively, you need to carefully follow the below steps to the T: 

  1. Make sure that your natural hair is flat and well-secured, as explained in the previous section. Lay your edges down with some gel or a holding spray. Doing so will help reduce friction between the wig cap and your natural hair. 
  2. Put on a wig cap to hold your natural hair in place and create a smooth, flat surface for the wig to sit upon. You can also wear a wig grip if you’d like. A wig grip is yet another way to hold your unit in place. It’s optional for this type of installation but helpful for people who want an extra layer of security. 
  3. Use an alcohol prep pad or a cotton pad saturated in alcohol to clean any leftover makeup or debris from your hairline. Be careful not to get the alcohol on your hair, as it will dry it out. 
  4. Take your wig out of the package and put it on your head. Position it so that it’s in line with your natural hairline. If your wig has an adjustable strap, use it to keep the wig from falling off. Use a white eyeliner pencil to lightly mark where you want the lace to lay; it’ll help you know where to put the glue in the next step. 
  5. Use your nail-cutting scissors to cut away the excess lace around your ears and hairline (as explained in the previous section). 
  6. Apply your wig glue, or got2b glued spray along your hairline where you made those eyeliner marks. 
  7. Use your blow dryer to dry the glue a bit and make it tacky.
  8. Pull your lace forward and press it into the glue. 
  9. Use your alcohol to wipe away any excess glue from your skin. Be extra careful not to get any alcohol on the lace, as it may weaken the glue’s bond. 
  10. Tie the front of your wig down with a silk or satin scarf for at least a half-hour. This will help to strengthen the glue’s bond. 
  11. Remove the scarf and style your wig as desired. 

Put On a Lace Front Wig without Glue

Though wearing a wig with glue is the preferred wig installation method for most, going glueless is useful sometimes. Glueless wig installation is ideal for people who are allergic to wig glue or prefer to change up their wigs often. It also comes in handy when you need to get out of the house fast.

Without glue, you can throw on your wig and take it off in no time. And when you apply the wig right, you won’t have to worry about it coming off until you’re ready to remove it. You also do not have to deal with messy glue and tricky glue application techniques. 

Lace front wigs can be worn glueless if they are constructed properly. A glueless lace front wig must have most of the following components: 

  • Combs in the back. Combs go a long way in securing any wig, but when you plan on wearing it glueless, the combs become much more significant. To use wig combs, you simply stick them into your hair at a diagonal angle.
  • Elastic straps. Elastic straps are attached to the front of the wig and worn around the back of the head. They help hold the wig securely to your head. When you put your wig on, all you need to do is slip the elastic strap over the back of your head. Adjust the strap as necessary to fit your head securely. 
  • Wig clips. Clips are much more secure than combs. This is because they have both a comb and a clamping mechanism to hold the wig in place. To use wig clips, stick the comb into your hair and press down on each side of the clip to secure. 
  • Flexible ear tabs: Ear tabs are flexible wires sewn into the lace near your ears. The purpose of ear tabs is to keep your lace from lifting up on the sides. To use them, fold them in the shape of your head. 

Note: If you’re savvy enough with needles and thread, you can add these reinforcements to your wig if your unit doesn’t come with them.  

Tools and Products to Wear a Lace Front Wig Without Glue

Make sure you have the following products and tools before installing your wig without glue:

  • Rattail comb
  • Nylon wig cap
  • Wig grip
  • Styling Mousse
  • Silk or satin scarf

Step by Step Guide on How to Wear a Lace Front Wig Without Glue

Putting on a lace front without glue will require you to take the following steps: 

  1. Take a few minutes to secure your hair using one of the methods outlined earlier. If you have super thick or long hair, cornrowing your hair is the best method to get your hair flat. 
  2. Put on a nylon wig cap and then apply a wig grip on top of that. The wig grip is essential for glueless wig application, as it stops your wig from moving around during the day. Since you won’t be using glue, you should take as many steps as possible to secure your wig. You’ll apply your wig grip just as you would a headband, strapping it in place using the velcro. 
  3. Place the wig on your head.
  4. Locate the adjustable strap inside the wig and pull it over the back of your head. If you need to adjust it, take a couple of seconds to do that. 
  5. If the wig has clips or combs, make sure you stick those into your hair (at the nape of your neck) for added security. 
  6. If your wig has bendable ear tabs, fold them so that they take on the shape of the sides of your head. 
  7. Your wig should be secure at this point with no movement. 
  8. Apply a little mousse around your hairline and smooth the hair down. Tie a scarf around your hairline. Doing this will add some weight to the lace and make the hairline lay flat. 
  9. Remove the scarf after about 10 minutes, and style your wig as desired. 

Slay Your Lace Front Wigs Now

There you have it! We’ve taken the guesswork out of the lace front installation process. Whether you decide to go for a glueless install or not, you now have all the information you need to slay your lace front to the gawds! 

Now, we’ve got a question for you! What’s your biggest challenge when applying a lace front wig? Get in on the discussion below in the comments!

Tags:

1000 wig (2) Baby Hair (3) beginners wig (3) Bleached Knots (2) Braids (3) Brazilian Hair (5) Camouflage Knots (2) care wigs (5) Dye Hair (3) Evolution of Wigs (2) Extension (3) full lace wig (7) full lace wigs (2) hair (6) Hairline (3) hairstyle (5) Halloween wig (2) high quality hair (3) Human Hair (8) human hair lace wig (2) human hair lace wigs (3) Human Hair Wigs (13) Install wig (2) Lace closures (3) Lace Front Wig (11) lace front wigs (7) Lace Wig (5) lace wigs (6) Looking natural hair (2) loose wave (2) Natural Looking Wigs (5) natural wig (2) Real Hair (2) Remy Hair (4) Single Knots (2) Straighten (2) Straight Hair (3) Synthetic Wigs (3) Transparent Lace (2) Virgin Hair (6) Virgin Remy hair (2) Wearing Wigs (4) Wear Wigs (4) Wholesale (2) Wigs (16)